Nissan Toyota Isuzu Mitsubishi Mazda Rover
The Cav Adapter fuel filter Assembly or the Supplementary Assembly provide greater fuel injection pump protection at a significantly reduced cost when compared to almost every factory fitted fuel filter.
The modern rotary fuel injection pump is lubricated by the fuel passing through it. The greater the level of contaminants (water & particles) in the fuel the faster the pump wears, eventually leading to an expensive injection pump rebuild. Most standard fuel filters are 8-10 micron whereas the R2132P filter is a 4micron filter. This improved filtration combined with the added bonus of a water and sediment sight bowl result in greater pump & injector protection.
The cost of the replacement R2132P filter cartridge can be as little as 1/10th the cost of the factory fuel filter, so the assembly often pays for itself in the first few filter changes, ignoring the future cost savings related to the extended life of the pump and injectors.
The R2132P cartridge is readily available and is often used on farm machinery, earthmoving equipment, transport, stationary & marine engines.
The CAV Adapter is fitted using the original filter head, hand primer, brackets and plumbing.
The Supplementary Assembly is usually fitted in line before the factory fuel filter.
This
adaptor allows fuel to travel to the bottom glass
water and sediment trap first, so you can see
any contaminants at a glance and drain them off
before they reach the filter.
The
cost and availability of replacement filters are
two good reasons to change to this filtration
system. It will pay for itself within the first
few filter changes.
|
Supplementary Assembly
|
CAV Adapter Assembly |
|
